xorg.conf

f# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
    Identifier     "Default Layout"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
# RgbPath is the location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

    RgbPath      "/usr/X11R6/lib/X11/rgb"
    FontPath     "/usr/X11R6/lib/X11/fonts/TrueType"
    FontPath     "/usr/X11R6/lib/X11/fonts/TTF"
    FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath     "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic:unscaled"
    FontPath     "/usr/X11R6/lib/X11/fonts/misc"
    FontPath     "/usr/X11R6/lib/X11/fonts/75dpi"
    FontPath     "/usr/X11R6/lib/X11/fonts/100dpi"
    FontPath     "unix/:7100"
EndSection

Section "Module"
    Load  "dbe"
    Load  "extmod"
    Load  "glx"
    Load  "v4l"
    Load  "record"
    Load  "freetype"
    Load  "type1"
    Load  "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option    "Xleds"        "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
#    Option    "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option    "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option    "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option    "XkbLayout"    "de"
# or:
#    Option    "XkbLayout"    "de"
#    Option    "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option    "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#    Option    "XkbOptions"    "ctrl:nocaps"
#
    Identifier  "Keyboard0"
    Driver      "kbd"
    Option        "XkbModel" "jp106"
    Option        "XkbLayout" "jp"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "IMPS/2"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5"
    Option        "Emulate3Buttons" "yes"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "LCD Panel 1024x768"
### Comment all HorizSync and VertSync values to use DDC:
    HorizSync    31.5 - 48.5
    VertRefresh  40.0 - 70.0
    Option        "dpms"
EndSection

Section "Device"
    Identifier  "Videocard0"
    Driver      "siliconmotion"
    VendorName  "Videocard vendor"
    BoardName   "Silicon Motion Lynx (generic)"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Videocard0"
    Monitor    "Monitor0"
    DefaultDepth     24
    SubSection "Display"
        Viewport   0 0
        Depth     24
        Modes    "1024x768" "800x600" "640x480"
    EndSubSection
EndSection

Section "DRI"
    Group        0
    Mode         0666
EndSection